Summary:
The article is about how to quickly test if the Celluar trail camera is connected properly to the App. In this article include the following, please refer to it according to your needs:
- How to test when you use it for the first time .
- How to test for daily use.
1. How to test when you use it for the first time.
Step 1. Make sure you keep the camera on during the test phase.
Step 2. Open the Gardepro app, go to "Settings" tab.
Step 3. Toggle “Transfer on Each Capture” to ON.
Step 4. View your camera screen, make sure your camera has connected to cellular network, it may take a few minutes till connected (depend on the network).
Step 5. After the setting takes effect, the orange bar on the left of the modified setting will disappear.(Note: Changes in settings will take effect more quickly if the camera screen is left lit at this time.)
Step 6. Press the “ Start ” button on the camera, and close the camera door and place it on the table.
Step 7. Make movements in front of the camera.
Step 8. Open gardepro again, and go to Gallery tab and refresh, generally in several minutes you will get the photo sent from the camera.
Step 9. Check the data plan, it will be reduced accordingly.
Step 10. Recommend toggling “Transfer on Each Capture” to OFF to avoid consuming more battery power.
2. How to test for daily use.
The above operation is a manual test, after the test is successful, you can follow the next steps to set up the automatic test.
Step 1.Open Gardepro app, go to " Setting " tag. Select mode as" hybrid "mode.
Step 2.Click to open "mode", turn on " time lapse" , and set "time lapse interval" to shoot once every 24 hours.
This will ensure that users will receive photos or videos every day, and make sure the camera is working properly.
If your problem still cannot be solved, please contact us.