summary:
"How to use GardePro A3S" consists of five sections, please refer to your needs:
- （video version）How to use GardePro A3S
- How to activate GardePro A3S;
- How to hold the camera for shooting and recording;
- How to view the shooting content;
- How to set up the camera;
- How to test if the camera's motion detection function works;
1.（video version）How to use GardePro A3S
2. How to activate GardePro A3S
Step 1, Install the battery, and then, turn the button from "OFF" to "ON".
Step 2, Wait for the numbers in the screen to go to zero and the blue screen to appear, and then the screen will appear black, at this time GardePro A3S is already in operation.
Step 3, Close the cover and place the camera where you want to shoot.
3. How to hold the camera for shooting
Step 1, Slide the button to "SET".
Step 2, According to the screen display, when the VCR UI appears on the top left corner, it means it is in video mode; when the Camera UI appears, it is in photo mode, and you can switch the mode with the up button or down button.
Step 3, Click the right button to start shooting or recording, and tap again to stop shooting.
4. How to view the shooting content
Step 1, Slide the bottom button to "SET".
Step 2, Click "OK" button to open the album, up button to view the previous one, down button to view the next one, left button to delete the photo.
Step 3, Click "OK" or "MENU" button again to return to the first screen.
5. How to set up the camera
Step 1, Slide the bottom button to "SET".
Step 2, Click the "MENU" button to enter the setting interface.
Step 3, Click the button to enter the setting interface you need to modify. For example, you can enter "Mode" to change the mode to "Hybrid".
6. How to test if the camera's motion detection function works
Step 1, Slide the bottom button to "SET".
Step 2, Click the "MENU" button to enter the setting interface.
Step 3, Click "Motion Test" to enter the test mode.
Step 4, Slide your hand in front of the camera to test if the camera is shooting normally.
Step 5, Click the "OK" button to exit the test mode.
If your problem still cannot be solved, please contact us.